Necon N-71 Push-Button Leaded Switch 15/32 thds., SPST on-off maintained contact
by Necon
New!: $5.73 (as of 01/31/2013 07:29 PST)
Pushbutton Switches
- Rank: #4885 in BISS
- Brand: Necon
- Dimensions: .5 pounds
The Keylock Rotary Switch is single ON contact design and mainly used in industrial.The Two Position Keylock Switch is used in industrial controlling circuits for controlling in electromagnetic starter, contactor, relay and other electric circuits.It has the advantages of safety, longevity, reliability and excellent design,harmonious in colour,design and function.
PUSH BUTTON SET
SPST Momentary On Push Button Switch (Round/Red) Rated at 3 Amps @ 125 VAC, Electrical Life 50,000 Cycles
Comes with plastic and metal body and a locking nut. 2-pin panel mounting type for special use.The push button switch is used in industrial controlling circuits for controlling in electromagnetic starter, Contactor, Relay and other electric circuits.The US users should prepare a voltage converter(not included here ) to make the push button switch work normally.
SERVICE KIT ROTARY SWITCH
Push Button Switch "Yellow Button" Normally Open/Momentary-On, Rated at 3 Amps @ 125 VAC, Electrical Life 50,000 Cycles
NOTE: Please pay attention to the working Voltage of the light to make sure the push button switch can be used at your place before ordering.push it on, release off, built in LED can give out green light. Widely used for electrical automatic control circuit for send out control signal.
Push Button Switch "Black Button" Normally Closed/Momentary-Off, Rated at 3 Amps @ 125 VAC, Electrical Life 50,000 Cycles
This switch can control you to make and break the circuit of your bench drilling machine, grinding machine, Belt Sander, cutting machine and so on. Screw terminals ensure easily wiring.
Feature: AC/DC 110V white, yellow, blue and red signal lamp, 5mm hole dia, four screw terminals. Widely used in industrial automatic system for circuit controlling of machines.
SPST Normally Closed Push Button Switch (Short/Red) Rated at 4 Amps @ 125 VAC, Electrical Life 50,000 Cycles
Black Pushbutton Switch with metal internal construction. Extremely solid construction. Contact resistance: ?50m? Insulation resistance: ?1000M? Dielectric Intensity: 2000VAC Operating Temp: -us.html?~ +55? Mechanical Life: 1,000,000 cycles Electrical Life: 200,000 cycles Operation Pressure: About 4N Operation Travel: About 1.5mm LED Life: 40000 hours 16mm diameter Switch Rating: 3A/250VAC Contact Configuration: 1NO1NC /2NO 2NC Operation Type: Latching The Front Shape: Flat Round The crust material: Black Plastic Ring Illuminated IP Degree: IP40
JEGS RPM Activated Switches allow you to turn accessories on or off at the desired RPM. These switches use push buttons or DIP switches to set the RPM, so you don't need to purchase RPM modules or chips. The Window switch turns on an accessory at the desired RPM and then turns it off at a second higher RPM (ideal for use w/ nitrous so it comes on at a predetermined RPM, and shuts off again before peak RPM) . These switches can handle accessories up to 3 amps (use with a relay to control circuits over 3 amps) . Made in USA.
This high quality metal push button has a built-in latch type green annular LED indicator. To operate the switch simply push the button for desired response. A light push to the button will cause momentary action. A longer push will latch on for blue illumination. A second push to the button will turn it off. Our switch features 3 terminal button actuator microswitch that is rated 3A/220VAC, and is reliability tested to 1,000,000 cycles. The LED input voltage is 20mA/12VDC. The head diameter measures 3/4" (18mm,) the button diameter measures 3/8" (10mm,), and the depth including contacts measures 1.5" (35mm.)The hole size required is 5/8"(16mm.) This listing is for the GREEN LED push button. For additional colors please see out other listings. We have Red, Blue, Green, and white "angel eyes" available for immediate shipping!
This high quality metal push button has a built-in latch type red annular LED indicator. To operate the switch simply push the button for desired response. A light push to the button will cause momentary action. A longer push will latch on for Red illumination. A second push to the button will turn it off. Our switch features 3 terminal button actuator microswitch that is rated 3A/220VAC, and is reliability tested to 1,000,000 cycles. The LED input voltage is 20mA/12VDC. The head diameter measures 3/4" (18mm,) the button diameter measures 3/8" (10mm,), and the depth including contacts measures 1.5" (35mm.)The hole size required is 5/8"(16mm.) This listing is for the RED LED push button. For additional colors please see out other listings. We have Red, Blue, Green, and white "angel eyes" available for immediate shipping!
Push Button Switch "Blue Button" Normally Open/Momentary-On, Rated at 3 Amps @ 125 VAC, Electrical Life 50,000 Cycles
SureFire Tailcap Switch Assembly w/ 7 inches Cable for MU Weaponlight System
Push Button Switch "Green Button" Normally Open/Momentary-On, Rated at 3 Amps @ 125 VAC, Electrical Life 50,000 Cycles